Bike Services

For the following services we collect and return your bike at a time and place suitable for you. We then carry out the work in our fully equipped workshop and then return your bike again to suit your schedule.

Prices quoted exclude parts as these vary considerably dependent upon the type of cycle. We provide a wide range of quality parts and can also fit suitable parts provided by you.

£45  Ride Ready Service – A basic service checking components for correct and safe operation,brake and gear operation, tyre wear and pressure, bolts torqued, lubrication and adjustment with a recommendation report for any further work as required.

£15 Puncture Repair – Including new tube.

£30 Brake Service (Hydraulic) – Inspect for leaks and hose damage, check pads, replace as required, check discs for wear and true running straighten if required (subject to tolerance), bleed system and set-up.

£120 Major Service – Major overhaul of your bike with a deep clean valet included. Headset, hubs, pedals and bottom bracket all stripped down, degreased, regreased and rebuilt with new bearings as required. Drive components, chain, gears and crank all checked for wear and parts replaced as necessary.  Wheels straightened and retension spokes.  Suspension units inspected and adjusted. All components finally checked for correct and safe operation, brake and gear operation, tyre wear and pressure, bolts torqued, lubrication and adjustment with a recommendation report for any further work as required.

£30 Wheel Service Front or Rear per wheel – Clean and inspect, strip down hubs and freewheel, degrease and regrease bearings / replace as required, straighten and retension spokes (included in Major Service).

£30 Bottom Bracket Bearing Replacement Service – inspect strip down, clean and degrease, replace parts as appropriate for BB type, grease, rebuild and adjust as required (included in Major Service).

£40 Standard Rear Suspension Service (£20 if added to Major Service) – Removal of rear shock, clean and inspect, strip down air can, replace seals and lubricate, inspect and replace bushings as required, re-install and pump to required pressure.

£40 Standard Front Fork Service (£30 if added to Major Service) – Clean and inspect, removal of lower fork legs,  strip down, replace seals and fork oil, pump to required pressure.

£25 Electronic Gears software update – Updating the software on Shimano Di2 gear systems.

£ POA Specialist Suspension Service – For comprehensive suspension servicing we work with specialised servicing agents who can do the jobs we can’t (such as Nitrogen re-charging).  Please contact us for further details or to discuss your requirements.

£ POA Frame Services – Tailored to suit requirements.  A frame service can include the following items; Alignment checked and straightened (within specification); All suspension bearings, bushes checked and renewed as required; Bottom Bracket, bottle cages and derailleur threads cleaned and retapped; Bottom Bracket faced; Disc mounts faced; Crown race faced; Fork steerer tube threads recut. Many of the Frame Services operations require stripping down other components and so is usually performed in conjunction with a Major Service or other Collect and Return Services.

Want a tailored service? Call us now on 07790 495 920

Di2 repair service

Servicing a road bike with Shimano Di2 Gears